Product Introduction

(MJABP)

Class A foam fire extinguishing agent is a uniquely formulated new foam fire extinguishing agent. It has incomparable fire-fighting adaptability. The special formula of Class A foam fire extinguishing agent foam liquid is suitable for fighting Class A/B fires. It improves the water permeability and reduces the surface tension of water so that water can penetrate to the general The deep inside of combustible materials will not flow off the surface of the material. Therefore, the Class A foam liquid can effectively extinguish fires in deep parts of combustible materials, which can quickly extinguish fires and save water for fire fighting. The effect of absorbing heat in the fire field to prevent resurgence. The foaming component in the foam liquid formulation of Class A foam fire extinguishing agent can increase the viscosity of water and stick to the surface of combustibles for a long time to form a protective layer against radiant heat to prevent fire.

Technical parameters

1. Wetting time under 1% ratio: ≤20.0S

2. Rescuing buildings can be based on the concentration of 0.3%~0.5%

3. Use conditions for extinguishing Class A fire: HA: 3.0%, FA: 20.0 times, TA: 10.0min

4. Use conditions for thermal insulation and protection performance: According to the ratio of HG:3.0%.

Usage & Storage

This product should be sealed and stored in a cool, dry and ventilated place, the storage temperature is not lower than the freezing point temperature plus 5°C, not higher than 45°C, and the product is valid for three years.

Do not mix with other fire extinguishing agents.

The packaging specifications of this product are 25Kg, 50Kg, 200Kg.

The company can also configure pharmaceutical products with special requirements for your organization.